X10

Processor+pre Effects unit

The front Effects unit specially designed for the party room increases the music dynamics, with its own audio test system, and dual engine pressure limit to protect the audio settings.

Product Characteristics

1. Adopting the latest ADI five series chips, 64 Bit high-speed dual core DSP processor 2. The music channel has 9 PEQ stereo equalizers and automatically recognizes fiber optic audio digital inputs. 3. The microphone has 15 PEQ segments that are individually adjusted, with a fully digital audio processing system and stereo DSP multiple digital reverberation, resulting in a more professional vocal effect. 4. Microphone noise reduction setting, independent pressure limit design; Shift frequency from 2Hz to 8Hz with optional feedback suppression and "OFF" option. 5. The effect channel is independently equipped with high and low pass, and reverberation and echo are respectively equipped with 5 parameter equalization (PEQ) functions. 6. Each output channel is equipped with 7 parameter equalization (PEQ) segments, high and low pass adjustment, mixing ratio, polarity, delay, voltage limit, and gain functions. 7. Support VOD infrared interface control of the machine. 8. Support RS232 connection to computer control machines, equipped with professional PC device management and control software. 9. Equipped with RTA spectrum display, it can more effectively locate the whistling frequency points, making whistling disappear without a trace. 10. The three-level engineering password locking function can set the equipment locking level according to the use needs. 11. It can store 9 sets of system modes, and the startup status is the last time the machine saved data.

Parameter

Maximum input level of music port:+14dBu (4V RMS) Maximum output level of output channel:+14dBu (4V RMS) Music gain: 0dB,+3dB,+6dB (three options) Microphone sensitivity: 64mV (Out: 4V) Signal to noise ratio: > 90dB Power supply: 220V/AC/50Hz Size: 483 * 218.5 * 47.5mm

Page Content Update Time:2023-08-06 03:42:15

The relevant information on the website is for reference only. All products are subject to physical inspection and are subject to change without prior notice.

400-066-2066