Product Characteristics
1.1U rack space 2.2 sets of inputs and 4 sets of outputs 3. Can specify any input to output 4. Equipped with frequency division, equalization, delay, and amplitude limiting functions 5. Equipped with Linkwitz Reiley, Bessel, and Butterworth filters 6. The filter slopes are respectively 12, 18, 24, 48 dB/Octave band 7. Parametric equalizer: band-pass, 1/64 to 4 Octave band range 8. Input and output delay 9. Each output has a limiter 10. Intuitive user interface 11. Program control through panel, PC, or MIDI 12. AMX compatible network link control 13. Specialized input and output level meters 14. Balanced input and output XLR audio signal connector
Parameter
DP-240 Speaker Processor Technical Specifications: Input: Active balance, 18k Ω Maximum input level:+20dBu Output: Active balance, 100 Ω Maximum output level:+20dBu Frequency response: 20Hz~20kHz, ± 0.25dB Total harmonic distortion:<0.01% @ 1kHz,+20dBu Dynamic range:>110dB (20Hz~20kHz) unweighted Output noise:<-90dBu unweighted Number of equalization filters: 6 per input and 4 per output Equalizing filter bandwidth: 1/64 Oct~4 Oct Equalizing filter range:+15/-30dB, with increments of 0.1dB Frequency resolution: 1/24 Oct Upper limit frequency slope: 6 dB/Oct and 12 dB/Oct selectable (1 upper limit frequency, 2 upper limit frequencies) Upper frequency range: 19.7Hz~2kHz+/-15dB, in increments of 0.1dB Lower frequency slope: 6 dB/Oct and 12 dB/Oct selectable (1 lower frequency, 2 lower frequencies) Lower frequency range: 3.1886kHz~20.1587kHz+/-15dB, in increments of 0.1dB High pass filter types: Linkowitz Raleigh, Bessel, Butterworth High pass filter slope: 12 dB/Oct, 18 dB/Oct, 24 dB/Oct, and 48 dB/Oct High pass filter frequency range: Off~21.983.3kHz, in 245 step increments Type of low-pass filter: Linkowitz Raleigh, Bessel, Butterworth Low pass filter slope: 12 dB/Oct, 18 dB/Oct, and 24 dB/Oct Low pass filter frequency range: Off~21.983.3kHz, in 2 45 step increments Input maximum delay: 100ms Maximum output delay: 21ms Increment: 20 μ S Input and output gain range:+12/-40dB, in increments of 0.1dB Input and output gain polarity: 0o or 180o (optional in output gain state) Compressor/limiter threshold: -20dBu~+20 dBu, in 1dB increments Compressor/limiter ratio: 1.2:1~∞ (1.2, 1.5, 2.0, 3, 4, 6, 10, 20, ∞: 1) Compressor/amplitude limiting trigger time value: 0.5ms~50ms/dB Compressor/amplitude limiting release time value: 10ms~1s/dB Compressor/limiting frequency range: 20Hz~10.6kHz Processor input A/D: 24 bit, Processor output D/A: 24 bit, Processor sampling rate: 48KHZ,
